Mounting the Pathfinder Expansion Module
17
Installation and Maintenance Manual
Federal Signal
www.fedsig.com
Mounting the Expansion Module
To mount the Expansion Module:
1.
Use the Expansion Module as a template to mark the mounting holes.
2.
Choose a bit appropriate for the installer-supplied mounting hardware and drill
the center of the mounting holes.
3.
Use the (4) supplied #10 Type B screws or user-supplied mounting hardware
to mount the Expansion Module. Place the screws through a combination of
the six holes on the sides of the unit, ensuring that the Expansion Module is
fastened securely.
Figure 6 Mounting the Module
