background image

Pathfinder

® 

Federal Signal

 

www.fedsig.com

An Overview of the Pathfinder®

10   

An Overview of the Pathfinder

®

The Pathfinder siren is a full-featured, programmable, electronic siren and light 

control system. State-of-the-art microprocessor technology is used to create 

a system with a small, compact siren system that can be installed under the 

dashboard (Self -Contained), in the trunk, or under the seat (remote) of any vehicle 

with a 12 V or 24 V negative ground system. The Pathfinder siren uses class D 

amplifier technology without the need for a large and heavy transformer. The 

PF200 provides two independent 100 W channels of audio, for a total of 200 W. 

The PF100 provides one 100-watt channel.
The module provides the automatic, simultaneous light and siren activation 

required by some jurisdictions. A security gun timer is also provided to minimize 

the possibility of unauthorized shotgun release. The module has two easily 

accessible Convergence Network serial ports that can connect a remote mounted 

control head and/or any serially-controlled Federal Signal product. The siren also 

has FS Vehicle Integration to allow for various vehicle events to integrate with 

siren/lighting control. A variety of system features can be programmed with the 

Convergence Network Configuration Software from a computer via a USB cable 

that connects the siren amplifier. System features include flash patterns, siren 

tones, and momentary, push-on/push-off, timed relay operation, as well as vehicle 

events. Programming does not require disassembling or removing any hardware 

from the vehicle.

Siren, PA, and Speakers

The Pathfinder produces wail, yelp, priority, and an air horn sound by default. The 

horn-ring transfer feature enables the driver to control siren tones by pressing the 

horn button. Public address is available with the Federal Signal microphone, which 

is included with the system. Radio rebroadcast is also available. The Pathfinder 

PF200 can drive one or two 11-ohm impedance, 100-watt speakers. The two  

11-ohm impedance, 100-watt speakers have separate wires that allow the 

Pathfinder to provide dual siren tones. Alternatively, the Pathfinder can drive one 

11-ohm impedance, 100-watt speaker on one channel, and two Rumbler speakers 

on the second channel to provide Rumbler integration without the need for a 

secondary external amplifier.
The PF100 Pathfinder can drive one 11-ohm impedance, 100-watt speaker.

Light Bars and SignalMaster

®

 Control

Compatible light bars include full featured, serially-controlled Federal Signal 

Legend®, Valor®, Allegiant

, Navigator®, and Integrity®, as well as the SpectraLux® 

ILS Series of interior-mounted light bars. In addition, flash rates and patterns, light 

bar dimming, external SignalMaster control and other options can be programmed 

with the Convergence Network Configuration Software.

Содержание Pathfinder PF100





































Отзывы: