11
Specifications
Description, Specifications, and Installation Manual
Federal Signal
www.fedsig.com
The following is a picture of the Informer100 Speaker shown with optional 225XL Warning
Light.
Figure 2 Informer100 Speaker with 225XL light
Specifications
Table 3 Electrical
Operating Voltages I-IP100AC
Switch-selectable 120 or 240 Vac
120 Vac nom, 50/60 Hz or
240 Vac nom, 50/60 Hz
Operating Current I-IP100AC
120 Vac; 26 mA Standby, 1.50 A during a function,
4.50 A during a function if relays are fully loaded.
240 Vac; 21 mA Standby, 820 mA during a function,
3.82 A during a function if relay outputs are fully loaded.
Operating Voltages I-IP100DC
24 Vdc nominal
Operating Current I-IP100DC
24 Vdc; 100 mA Standby, 5.15 A during a function,
12.15 A during a function if relay outputs are fully
loaded.
Relay Outputs
Mechanical relay output 2 A at 30 Vdc or 250 Vac, 25 A
max inrush, N.O. dry contacts.
DC solid-state relay output 5 A at up to 28 Vdc current
limited.
AC solid-state relay output 1 A at 20 to 264 Vac zero
crossing switched.
Ethernet Port
IEEE 802.3, 10/100 Base-T connection
Alarm Initiating Inputs
Four optically Isolated Inputs
Dry Contact closure < 1 kilohm
NOTE
: The four optically isolated Alarm Initiation Inputs
allow remote activation of tones and messages through
a volt-free, dry-contact closure.
The momentary contact closure must be a minimum of
500 ms.
