9
Installation and Maintenance Manual
LP800 Solaris Beacon
Federal Signal
www.fedsig.com
Overview of the LP800 Solaris Beacon
The LP800 Solaris
®
Beacon is an LED light source that provides a
reliable signal with 14 flashing patterns. The LP800 Solaris Beacon
has two Solaris reflectors with 15 powerful LEDs. The available
colors are red, amber, or blue. The light can operate on 10- to 30-
volt power source.
Unpacking the Product
After unpacking the product, inspect it for damage that may have
occurred in transit. If it has been damaged, file a claim immediately
with the carrier, stating the extent of damage. Carefully check all
envelopes, shipping labels, and tags before removing or destroying
them.
Preparing for the Installation
To prepare for the beacon installation, assemble these installer-
supplied materials:
• 18 AWG (1 mm
2
) wire for lengths up to 15 feet (5 m) or minimum
16 AWG (1.5 mm
2
) wire for lengths greater than 15 feet (5 m)
• Fuseholder with 5 A fuse
Selecting a flash pattern is optional and should be completed
during the installation. For more information, see “Selecting a Flash
Pattern” on page 16.
Figure 1 LP800 Solaris
Ø 140 mm
Ø 164 mm
118.5 mm
