6
Power Control
The power control turns the unit on and off.
Warning Light
Condensed water may accumulate in the unit. If the
internal tank becomes full, the Warning Light will shine
and the unit
will not operate until the unit has been
drained
. See Draining Excess Water section for
instructions on how to drain the water.
Mode Control
The Mode Control has 4 settings:
The settings are adjusted with the Mode Control
being used.
Cool Mode
is cooled and hot air is exhausted to the outside
air through the exhaust tube. Adjust fan speed
and temperature to suit your desired comfort
level.
Note: The air exchange hoses must vent
outside the room when using Cool Mode.
Dehumidify Mode
cooling mode. The fan speed is not adjustable
under the Dehumidification mode while the room
Fan Mode
Fan Speed Control
The Fan Speed Control has 3 settings:
High, Medium, and Low.
Timer Control
Auto turn off:
With machine powered on, press timer button to
select number of hours you would like the unit to
run in air conditioning mode until it automatically
shuts off.
Auto turn on:
With machine powered off, press timer button to
select number of hours until you would like the
unit to automatically start running in air
conditioning mode.
Temp/Timer Set Controls
Used for adjusting the timer and thermostat.
The default display is room temperature.
the set temperature is displayed and may be adjusted.
After 15 seconds the display will revert back to room
temperature. Temperature is adjustable in Cool, Heat
and Dehumidify modes.
Note: By pressing both Temp/Timer Set buttons
display will toggle between Celsius and
Fahrenheit.
E
N
G
L
I
S
H
button. An icon will indicate which setting is currently
display on the LCD. During the cooling mode the air
When Cool mode is selected, the cool mode icon will
When the Heat mode is selected, the heat mode icon
will display on the LCD. Heating is activated only when
Adjust fan speed and temperature to suit your desired
comfort level.
Note: The air exchange hoses must vent outside the
Caution: Heat/Cool models are designed to be used
only as a supplemental heat source. They should be
used in addition to regular heating systems and
never as the primary source of heat.
When Dehumidify mode is selected, the dehumidify
icon will display on the LCD. Air is dehumidified as
it passes through the unit, without being in full
the ambient temperature is below 81°F (27°C).
temperature is below 77°F (25°C).
When Fan mode is selected the fan icon will display
vented in Fan mode.)
with no cooling. (Note: unit does not need to be
on the LCD. Air is circulated throughout the room
In cooling mode, when “up” or “down” button is pressed
on the unit at the same time for 3 seconds, the
Heat Mode (Only on Heat/Cool models)
Cool, Dehumidify, Fan and Heating (only on Heat/Cool models).
room when using Heat Mode.
