4
5
SET-UP
• Select a firm, level and flat location. For best airflow, locate the unit 3 feet (1 M) from
any wall or furniture.
• When operating, large volumes of air are drawn toward the air purifier. Surrounding
areas should be cleaned and/or vacuumed frequently to prevent build-up of dust and
other contaminates. This may also help prolong the life of the filter. If the unit is placed
on a light colored carpet, a small mat or rug should be used underneath to prevent
permanent staining. This is especially important in homes with contamination from
smoking or fireplaces.
HOW YOUR FEBREZE
™
AIR PURIFIER WORKS
ENERGY STAR
®
This product earned the ENERGY STAR
®
by meeting strict energy efficiency
guidelines set by the US EPA. US EPA does not endorse any manufacturer
claims of healthier indoor air from the use of this product.
The energy efficiency of this ENERGY STAR
®
qualified model is measured
based on a ratio between the model’s Clean Air Delivery Rate (CADR) for Dust
and the electrical energy it consumes, or CADR/Watt.
INSTALLING FEBREZE
™
HEPA-TYPE FILTERS
The Dual Action Febreze™ HEPA- Type Filter with
built-in pre-filter is supplied within the air purifier.
It is wrapped to ensure purity.
• Turn off and unplug the air purifier.
• Turn the air purifier upside down on a flat
surface. The filter is visible from the bottom of
the unit.
• Remove the filter by grasping the edges of the
filter frame or the ribbon tab. Note: There are
small molded tabs on the unit that secure the
filter in place and prevent it from slipping out of
the unit. Pull away from tabs and up to remove.
When removing a used filter that is not wrapped
in plastic, pull the ribbon tab to remove.
•
Remove the protective plastic from the
Febreze™ HEPA-Type filter.
• Insert the fresh filter into unit with the black (activated carbon) side facing the air
intake grille. The filter will be held in place in the unit by the small molded tabs. Be
sure to leave the ribbon pull tab accessible to facilitate easy removal next time you
have to replace the filter.
Note: The Febreze™ Dual Action HEPA-Type filters are not washable.
Do not immerse in water.
Unique 4-Stage System to help
Clean & Freshen the Air
1
Dirty, stale, odor-filled air is drawn into
the air purifier by a strong fan.
2
The Dual Action Filter has a specially
formulated carbon pre-filter that traps
household odors and larger airborne
particles, such as pet hair, lint
and dust.
1
3
As the air moves through the
HEPA-Type filter, up to 99% of the
microscopic particles, 2 microns
and larger, are captured.
1
4
Fresh Febreze
™
scent is added to
the filtered air before it is released
back into the room.
1
2
3
4
INSTALLING THE FEBREZE
™
SCENT CARTRIDGE
One Febreze™ air purifier scent cartridge is
supplied with your new air purifier. It is packed in
the same plastic bag as this Instruction
Manual. It is sealed for freshness.
• Turn off and unplug the air
purifier. Open the door on the Scent
Cartridge Compartment on the control
panel. (See next page for location)
• Peel the foil layer off the cartridge by
pulling on the tab. Once removed, immediately
dispose of the foil layer.
A thin clear film with
perforations will remain attached to the
cartridge. DO NOT REMOVE.
NOTE:
CAUTION: EYE IRRITANT. Avoid
contact with eyes. Do not touch the scent
pad located within the cartridge. Contains
fragrance oils. See page 3 for FIRST AID
treatment if necessary.
1 From the air that passes through the filter, 2 microns and larger.
Overall particle reduction depends on many factors including the amount of air processed, the
pollutant type, and the pollutant’s introduction rate into the environment.
Note: A thin clear
film with perforations
will remain attached
to the cartridge.
DO NOT
REMOVE
