V.1.02
www.FlyCamOne.com
Preparation
For using the glasses, you additionally need the FCO
Ξ
Core Set as well as the 2.4
or 5.8 GHz FCO
Ξ
Transmission Set.
To control the camera head we developed the FCO
Ξ
LinX System, or for the
usage with your R/C system the FCO
Ξ
RX-cable
For both versions a new basic position of the camera head has to be defined at
first.
Setting of a new basic position of the camera head
Please don´t connect the LinX receiver or the RX-cable yet!
Switch on the camera and set the new basic position by the „
“ buttons of the
FCO
Ξ
logo at the front side of the camera.
If the camera is installed inside the model e.g.,
choose the upright position – 90° of the neutral
position. The new basic position will be confirmed
by pressing the up and down button at once for 5
seconds. Every time the LinX receiver or the RC-
cable will be connected, this new position will be
selected.
confirm
the new
position
Usage of the FCO
Ξ
V-Eyes with the FCO
Ξ
LinX System
The FCO
Ξ
LinX enables the usage of the complete system without a R/C system,
resp. separated from the R/C System.
Schematic View
1. V-Eyes
Glasses
2. V-Eyes
Cable
3. V-Eyes
Base
4. LinX
433MHz
transmitter
5. Transmission
Set
2.4/5.8GHz receiver
6. LinX 433MHz receiver
7. Camera with pivotable
head
8. Transmission
Set
2.4/5.8GHz transmitter
