Fcar FV100, Инструкция по эксплуатации товара

Страница: 32 / 50

FCAR Product Instruction Manual
32
perform component testing, when performing the actuation test, the diagnostic device
inputs an instruction to the ECU to drive the actuator, and thereby determines whether
the actuator of the vehicle electronic control system and its line are normal. Different
control systems of different models have different test options. Please refer to the
menu display.
The following is an example of the air conditioner compressor command state under
Ford's PCM (Powertrain Control Module).

How to do actuation test
1)
Enter Ford PCM (Powertrain Control Module) diagnostic interface by select Auto
Vehicle Selection or Manual Vehicle Selection;
2)
Select [Actuation Test] on Diagnosis interface;
3)
Test item selection [ACC_CMD (air conditioner compressor command status)];
4)
Drive the air conditioner compressor operation through [Off] and [On] buttons.
When an operation is successfully completed, the screen will display “Operation
Successfully” or other similar prompt information, as shown in the following figure.
5)
According to the implementation, test whether the working state of the air
conditioner compressor is normal. Click [Back] to exit the test.
Note: The control buttons will be different according to the selected test item,