Fcar FV100, Инструкция по эксплуатации товара

Страница: 27 / 50

FCAR Product Instruction Manual
27
3.5.2 Erase Fault Cede
Before clearing the fault code for later viewing and comparison, please record and
store the read fault code that you read.

How to erase fault code
1)
Select [Erase fault code] on the control module diagnosis interface;
2) At this time, the diagnostic system will pop up the prompts “Turn off the engine
and turn on the ignition switch”, “The fault code and freeze frame data will be
cleared, do you want to continue?”, select [Continue]; (Note: This step requires
you to strictly operate the vehicle in accordance with the menu prompts)
3)
When another prompt message pops up, select [Return] and re-execute the read
fault code function to verify whether the fault code has been cleared.

Fault code analysis steps
1)
Read and record all fault codes;
2)
Erase all fault codes;
3)
Simulate the conditions generated by the fault and start a road test;