FCAR Product Instruction Manual
10
used to charge the built-in battery pack.
Note
: Voltage of the power supply should be within the scope of the product host.
Exceeding the range may cause damage to the product.
Booting
Press and hold the host power switch (about 3 seconds) to power on host, the
following welcome interface will pop up, and then system starts working.
Shutdown
All vehicle communication must be terminated before shutting down the diagnostic
equipment. Vehicle's electronic control module would go wrong if forced shutdown
during communication, please exit all diagnostic applications before shutting down.
The shutdown steps are as follows:
1)
Short press the host power switch (about 2 seconds)
2)
Click [Shutdown] in the pop-up prompt to close the host.
Introduction to Each Menu Option
After the system is powered on, enter the following main menu:
Содержание FV100
Страница 49: ...FCAR Product Instruction Manual 49 ...
