Fcar FV100, Инструкция по эксплуатации товара

Страница: 16 / 50

FCAR Product Instruction Manual
16
diagnostics socket directly.

For vehicles with a non-standard OBD-II port: Need to add a corresponding
connector to adapt the port; some other vehicles need to supply power to the
VCI box through other power sources of the vehicle.
Standard OBD-II port connection
：
Instructions:
1)
Determine the location and the port of the diagnostic socket;
2)
Connect one end of main test cable to DB15 connector of the VCI box and fasten
the fixing bolt;
3)
Connect the other end of the main test cable to the vehicle diagnostic socket;
4)
At this time, the VCI box is powered by the vehicle diagnostic socket, and the
power indicator light is on.
Note: After test is completed, please rotate the fixing bolts and then gently
unplug the main test cable to avoid damage to the diagnostic port.
NON-OBD-II PORT CONNECTION
For vehicles connected to non-OBD-II interfaces, need to connect the main test cable
to their corresponding dedicated connectors, as shown in the figure below.