FCA US Voyager 2021 Скачать руководство пользователя страница 48

Страница: 48 / 392

GETTING TO KNOW YOUR VEHICLE

EATED

EATS

Front Heated Seats — If Equipped

The front heated seats control buttons are

located in the touchscreen.
You can choose from HI, LO or off heat settings.

The indicator lights in each switch indicate the

level of heat in use. Two indicator lights will

illuminate for HI, one for LO and none for off.



Press the heated seat button once to turn

the HI setting on.



Press the heated seat button a second

time to turn the LO setting on.



Press the heated seat button a third time

to turn the heating elements off.

The level of heat selected will stay on until the

operator changes it.

NOTE:



Once a heat setting is selected, heat will be

felt within two to five minutes.



The engine must be running for the heated

seats to operate.

For information on use with the Remote Start

system, see

page 20.

DJUSTABLE

RMREST

RONT

EATS

)

— I

QUIPPED

Your vehicle may be equipped with adjustable

armrests on the front seats. The armrest can be

adjusted up or down.

To adjust the armrest height, push and hold the

button while moving the armrest to the desired

position. Release the button to lock the armrest

into place.

Adjustable Armrest

EAD

ESTRAINTS

Head restraints are designed to reduce the risk

of injury by restricting head movement in the

event of a rear impact. Head restraints should

be adjusted so that the top of the head restraint

is located above the top of your ear.

WARNING!



Persons who are unable to feel pain to the

skin because of advanced age, chronic

illness, diabetes, spinal cord injury, medica

tion, alcohol use, exhaustion or other phys

ical condition must exercise care when

using the seat heater. It may cause burns

even at low temperatures, especially if

used for long periods of time.



Do not place anything on the seat or seat

back that insulates against heat, such as a

blanket or cushion. This may cause the seat

heater to overheat. Sitting in a seat that has

been overheated could cause serious

burns due to the increased surface

temperature of the seat.

21_RUV_OM_EN_US_t.book Page 46

Содержание Voyager 2021









































































































































































































































































































































































































Результаты поиска

Содержание Voyager 2021

Отзывы:

Похожие инструкции для Voyager 2021

Бренды по названию

Популярные бренды

FCA US Voyager 2021, Руководство пользователя

Результаты поиска

Содержание Voyager 2021

Отзывы:

Похожие инструкции для Voyager 2021

Бренды по названию

Популярные бренды