FCA US Voyager 2021 Скачать руководство пользователя страница 35

Страница: 35 / 392

GETTING TO KNOW YOUR VEHICLE

Second Row Bench Seat — If Equipped

The second row bench seat can accommodate

two passengers, while providing easy access to

the third row seats without any folding of the

second row seats.
To recline the seatback, lean forward slightly,

lift the recline lever located on the outboard

side of the seat cushion, and push back to the

desired position and release the lever. Lean

forward and lift the lever to return the seatback

to its normal position. Using body pressure, lean

forward and rearward on the seat to be sure the

seatback has latched.

Recline Lever

The bench seat does not stow in the floor, but is

removable for added cargo space.
Removing The Bench Seat

1. Adjust the driver and passenger seats

forward to allow room for the bench seat

removal.

2. Raise the armrest completely, then lift the

recline lever located on the outboard side of

the seat to fold the seatback flat against the

seat cushion.

Folded Position

3. Pull the release strap located behind the

seat, in the center near the floor to release

the latches.

Release Strap Location

WARNING!

Do not ride with the seatback reclined so that

the shoulder belt is no longer resting against

your chest. In a collision you could slide under

the seat belt, which could result in serious

injury or death.

21_RUV_OM_EN_US_t.book Page 33

Содержание Voyager 2021









































































































































































































































































































































































































Результаты поиска

Содержание Voyager 2021

Отзывы:

Похожие инструкции для Voyager 2021

Бренды по названию

Популярные бренды

FCA US Voyager 2021, Руководство пользователя

Результаты поиска

Содержание Voyager 2021

Отзывы:

Похожие инструкции для Voyager 2021

Бренды по названию

Популярные бренды