FCA US Voyager 2021 Скачать руководство пользователя страница 367

Страница: 367 / 392

TECHNICAL SPECIFICATIONS

365

The use of higher octane “Premium” gasoline is

not required, as it will not provide any benefit

over “Regular” gasoline in these engines.

EFORMULATED

ASOLINE

Many areas of the country require the use of

cleaner burning gasoline referred to as

“reformulated gasoline”. Reformulated

gasoline contains oxygenates and are

specifically blended to reduce vehicle

emissions and improve air quality.
The use of reformulated gasoline is

recommended. Properly blended reformulated

gasoline will provide improved performance

and durability of engine and fuel system

components.

ASOLINE

XYGENATE

LENDS

Some fuel suppliers blend unleaded gasoline

with oxygenates such as ethanol.

Problems that result from using gasoline

containing more than 15% ethanol (E-15) or

gasoline containing methanol are not the

responsibility of the manufacturer and may void

or not be covered under New Vehicle Limited

Warranty.

E-85 I

-F

LEX

UEL

EHICLES

Non-Flex Fuel Vehicles (FFV) are compatible

with gasoline containing up to 15% ethanol

(E-15). Use of gasoline with higher ethanol

content may void the New Vehicle Limited

Warranty.

If a Non-FFV vehicle is inadvertently fueled with

E-85 fuel, the engine will have some or all of

these symptoms:



Operate in a lean mode



OBD II Malfunction Indicator Light on



Poor engine performance



Poor cold start and cold drivability



Increased risk for fuel system component

corrosion

CNG A

LP F

UEL

YSTEM

ODIFICATIONS

Modifications that allow the engine to run on

Compressed Natural Gas (CNG) or Liquid

Propane (LP) may result in damage to the

engine, emissions, and fuel system

components. Problems that result from running

CNG or LP are not the responsibility of the

manufacturer and may void or not be covered

under the New Vehicle Limited Warranty.

CAUTION!

DO NOT use E-85, gasoline containing

methanol, or gasoline containing more than

15% ethanol (E-15). Use of these blends may

result in starting and drivability problems,

damage critical fuel system components,

cause emissions to exceed the applicable

standard, and/or cause the Malfunction

Indicator Light to illuminate. Please observe

pump labels as they should clearly

communicate if a fuel contains greater than

15% ethanol (E-15).

21_RUV_OM_EN_US_t.book Page 365

Содержание Voyager 2021









































































































































































































































































































































































































Результаты поиска

Содержание Voyager 2021

Отзывы:

Бренды по названию

Популярные бренды

FCA US Voyager 2021, Руководство пользователя

Результаты поиска

Содержание Voyager 2021

Отзывы:

Бренды по названию

Популярные бренды