FCA US Voyager 2021 Скачать руководство пользователя страница 136

Страница: 136 / 392

134

STARTING AND OPERATING

NOTE:

In order to ensure proper operation, the Cruise

Control system has been designed to shut down

if multiple Cruise Control functions are operated

at the same time. If this occurs, the Cruise

Control system can be reactivated by pushing

the Cruise Control on/off button and resetting

the desired vehicle set speed.

To Activate

Push the on/off button to activate the Cruise

Control. The cruise indicator light in the

instrument cluster display will illuminate. To

turn the system off, push the on/off button a

second time. The cruise indicator light will turn

off. The system should be turned off when not in

use.

To Set A Desired Speed

Turn the Cruise Control on.

NOTE:

The vehicle should be traveling at a steady

speed and on level ground before pushing the

SET (+) or SET (-) button.

When the vehicle has reached the desired

speed, push the SET (+) or SET (-) button and

release. Release the accelerator and the

vehicle will operate at the selected speed.

To Vary The Speed Setting

To Increase Or Decrease The Set Speed
When the Cruise Control is set, you can increase

speed by pushing the SET (+) button, or

decrease speed by pushing the SET (-) button.

U.S. Speed (mph)



Pushing the SET (+), or SET (-) button once

will result in a 1 mph speed adjustment. Each

subsequent tap of the button results in an

adjustment of 1 mph.



If the button is continually pushed, the set

speed will continue to adjust until the button

is released, then the new set speed will be

established.

Metric Speed (km/h)



Pushing the SET (+), or SET (-) button once

will result in a 1 km/h speed adjustment.

Each subsequent tap of the button results in

an adjustment of 1 km/h.



If the button is continually pushed, the set

speed will continue to adjust until the button

is released, then the new set speed will be

established.

WARNING!

Cruise Control can be dangerous where the

system cannot maintain a constant speed.

Your vehicle could go too fast for the

conditions, and you could lose control and

have an accident. Do not use Cruise Control

in heavy traffic or on roads that are winding,

icy, snow-covered or slippery.

WARNING!

Leaving the Cruise Control system on when

not in use is dangerous. You could

accidentally set the system or cause it to go

faster than you want. You could lose control

and have an accident. Always leave the

system off when you are not using it.

21_RUV_OM_EN_US_t.book Page 134

Содержание Voyager 2021









































































































































































































































































































































































































Результаты поиска

Содержание Voyager 2021

Отзывы:

Похожие инструкции для Voyager 2021

Бренды по названию

Популярные бренды

FCA US Voyager 2021, Руководство пользователя

Результаты поиска

Содержание Voyager 2021

Отзывы:

Похожие инструкции для Voyager 2021

Бренды по названию

Популярные бренды