82
VAIE 4000 Compact Systems
System manual
EN
VAIE
4000
8.7.4 SENDING OUT OF A LIVE EMERGENCY NOTICE FROM REMOTE STATIONS
1) Lift the safety lid on the station and press the EMERGENCY key once. It lights up steadily. The fact that the system has
been placed in a state of emergency by the station is shown also on any other stations and on the VAIE (with a flashing
red LED).
2) Select the zones where the message should be sent.
3) Activate the EVAC message or the ALERT message by means of the appropriate button or speak through the
microphone keeping the PTT key pressed until the end of the message.
Note: The P.T.T. key has priority over any pre-recorded messages being sent out.
4) If necessary, repeat the sequence of points
2
) and
3
) above several times.
Note: RESET/ACK key (microphone unit) / RESET key (VAIE fron panel) have the same functional features.
5) To end the state of emergency, press EMERGENCY button again.
8.7.5 EXIT OF THE SYSTEM FROM MANUAL MANAGEMENT OF AN EMERGENCY
At the end of the procedure for managing a Manual Emergency, press the red EMERGENCY key, which will extinguish and – if
there is no activation taking place from external peripheral units connected to the controlled input contacts – the system will
return automatically to its Idle state, displaying the MUSIC & PAGING screen.
The ALARM LED will extinguish to indicate that the VOICE ALARM has been deactivated.
Once the emergency state is over, all the manually pre-actived messages wil be deactivated. The messages related to
controlled inputs will remain active: if any of controlled inputs have been activated, the EMERGENCY button will start to
flash and the system will remain in a state of Automatic Emergency, resuming the broadcasting of the messages in the zone,
depending on how the activated inputs were programmed.
