11
DPU 1125C - DPU 1250C - DPU 1500C
A U D I O C O N T R A C T O R
2.1 Numbered references
(
1
) Front ventilation slits.
(
2
) ON/OFF signalling lamp.
(
3
) LED display.
(
4
) Mains switch.
(
5
) Rear ventilation slits.
(
6
) Terminal strip for external DC power supply / Relay.
(
7
) Fuse for external DC power supply.
(
8
) Frame connection.
(
9
) Mains plug with built-in fuse.
(
10
) Terminal strip for loudspeaker lines.
(
11
) Terminal strip for spare amplifier
connection.
(
12
) Dip-switch.
(
13
) Sockets for audio input and serial communication.
(
14
) Output volume controller.
(
15
) LED for acquisition settings conf rmation.
2.
GENERAL DESCRIPTION
The
DPU
amplifi er is able to provide a large range of functions, such as:
• line impedance measurements;
• amplifier diagnostics;
• check and insulation of the short-circuited speaker lines.
• check of insulation to earth (GND FAULT);
• volume control;
• selection of two inputs;
• possibility of including the LOW CUT filter.
These amplifiers can also be controlled via a serial interface. In addition to carrying out all the operations and/or checks set locally by means of the dip
switches, it will also be possible to display and alter all the parameters, including the following:
• reading of the reference impedance for the test;
• minimum and maximum values between which the test is valid;
• reading of the test status;
• testing of the inputs;
• measurement of the temperature of the end transistors;
• volume adjustment.
Models:
• DPU 1125C
• DPU 1250C
Model: DPU 1500C
Содержание DPU Series
Страница 27: ......
