FBII XL-20, Руководство пользователя, Страница: 16 / 28

XL-20 Owner’s Manual - Page 14
Quick Exit - Yes No
If enabled, this feature allows the user to exit without having to disarm then arm
the system. It will be activated by pressing the [STAY] key while the system is
armed and not in entry delay. this will start exit time, cause the keypad to beep
once and allow the user to exit without disarming the system. The system will
return to its last armed state after exit time has expired.
Quick Bypass - Yes No
If you have quick bypass programmed for your system you will not have to use
your user code to bypass zones. The quick bypass procedure is:
ZONE (1-8)
NOTE: Bypassed zones are not protected when the system is turned on. After the
bypass command has been accepted the keypad will sound one long beep and the
zone or zones bypassed will slowly blink.
Set Time and Date
To set the time and date:
Press # 3 [hours] [minutes] [month]
[day] [year]
where hours (01-23), minutes (00-59), month (01-12), day (01-31) and year (00-
99).
Note: In order to acknowledge your entry, a beep will sound after setting each
component of the time and date.
Turn Chime On/Off
Chime is an optional feature that causes the keypad to chime when selected doors
are opened when the burglary protection is off or disarmed.
Only your installer can program a zone for the chime feature, but once
programmed you can turn chime on or off to meet your daily needs. To turn
chime on or off.
Press # 6
BYPASS