FBII XL-20, Руководство пользователя, Страница: 10 / 28

XL-20 Owner’s Manual - Page 8
TURNING THE SYSTEM ON
You can turn the Burglar portion of your security system on and off. Before you
turn the system on it must be ready. If you have a protected door open, or
someone is moving by a motion detector the system will not show ready.
The system is ready if the ready light is on.
TURN THE SYSTEM ON AND LEAVE
Enter your four digit user code.
The System On (Arm) light will go on.
Exit through a door designated by your installer as an exit/entry door. You must
leave within the period of time known as the exit time. Check the reference sheet
for the time that has been set for your system.
NOT READY
If the system is not ready to be armed, the READY light will be off and the Zone
lights will show which zone or zones are not ready. The zone lights on the
keypad indicate the following conditions:
Fast Blink Alarm
Slow Blink/Low Intensity Bypass
Slow Pulse Trouble
Solid On Not Ready
Example: If the Ready light is not lit and the zone one light is solid on. An alarm
sensor on zone one is not normal. This might mean that a window is open or
someone is walking through a motion sensor. Check all sensors on zone one and
resolve the problem. When all sensors are normal the Ready light will come on
and the zone light will go out.
TO TURN THE SYSTEM ON - NOT READY
Determine which zone or zones is not ready, resolve the problem and turn the
system on normally. If the problem cannot be resolved you may bypass the zone
that is not ready. Bypassing should only be done if the problem on the zone
cannot be resolved OR if you intentionally wish to leave the zone off. Example:
you wish to keep the window open for ventilation. Zones that are bypassed are
not protected when the system is on. See Bypass for the correct procedure.