- 21 -
Miscellaneous Commands (Cont’d)
DOOR STRIKE
To activate door strikes:
Press:
#
then [5] [7], then Door No.
If programmed, certain user codes can also be used to open a door. See your
installer for door numbers.
TO VIEW TIME (LCD Keypads Only)
To view the system time, press:
#
then [5] [1]. A typical display is as
follows:
Jan 27, 2001
08:15A
TO SET TIME
To set the time, press:
#
[3] then user code*, then follow the prompts (on
LCD keypads only) and enter the hour, minute, month, day, and year. All
entries are 2-digit entries.
*The user code is not required if so programmed by installer.
TO DISPLAY ZONE DIRECTORY (LCD Keypads Only)
To view a list of the zones in the current partition, press:
#
[4].
The zones will automatically scroll.
USER LOG VIEW (LCD Keypads Only)
To view the system log, press:
#
[5] [3] plus your user code*. When the
command is accepted, the display will show the most recent event.
Pressing either the
STAY
or
✱
keys exits this mode. Pressing any
other key advances to the next valid log entry.
