- 14 -
Arming the System (Cont’d)
To Bypass multiple zones, within 10 seconds of the User Code +
Zone No. entry, enter
BYPASS
+
ZONE NO.
This command can be repeated for each zone to be bypassed (up to 24).
TO UNBYPASS A ZONE
Pressing the BYPASS button returns a bypassed zone to normal operation.
To unbypass a zone, the system must be disarmed (also note that 24-hour
zones cannot be unbypassed if they are faulted). To unbypass a zone(s),
repeat the bypass function as follows:
BYPASS
followed by your user code
†
+
ZONE NO.
After unbypassing, the zone display will show the state of the zones.
†
If the Quick Bypass feature has been enabled by the installer, do not enter
the user code when unbypassing zones.
