- 12 -
Arming the System (Cont’d)
TO ARM THE SYSTEM AND STAY INSIDE
To arm the perimeter portion of your burglar alarm and move around freely
inside the premises, use the STAY mode.
Check to make sure the system is ready. When it is ready, press:
STAY
followed by your user code.
When the system has been armed successfully, the ARMED indicator lights
and the following will be displayed:
LCD Keypad:
ON: STAY
PART 1
Fixed-Word Keypad:
STAY
LED Keypad:
“Arm” and “Stay” LEDs
lit
REMEMBER:
You must disarm the system or press [STAY] to initiate the
“quick exit” if you want to open the door or leave the premises after the exit
time has expired. Quick Exit restarts the exit time without disarming the
system.
TO ARM THE SYSTEM IN INSTANT MODE AND STAY INSIDE
In INSTANT STAY mode, the perimeter portion of your burglar alarm
system is armed but the time delays are eliminated from your normal
entry/exit door(s). All interior protection is disarmed, so you are free to move
around inside.
Check to make sure the system is READY. When it is ready, press:
INSTANT
followed by
STAY
followed by your user code.
When the system has been armed successfully, the ARMED light, the
INSTANT light, and the STAY light will all be on, and the following will be
displayed:
LCD Keypad:
ON: STAY / INS
PART 1
Fixed-Word Keypad:
STAY
INSTANT
LED Keypad:
“Armed,” “Stay,” and
“Instant” LEDs lit
