FBD 372 Скачать руководство пользователя страница 9

Страница: 9 / 38

INSTALLATION & OPERATION MANUAL

MULTI-FLAVOR MERCHANDISERS

4.2 Screen Layout

The multi-flavor setup allows the user to select more than one flavor to add into the dispensed drink. The user can select

any variety of flavors, a selected flavor will be grayed-out, and the POUR button will appear to indicate that a drink is ready

to be dispensed. The dispenser will continue to pour for as long as the POUR button is pressed. If the POUR button is

pushed without any flavors selected, only the base flavor will dispense. In addition to displaying the flavor images, the

screen will also show flavor and status messages.

The flavor messages are displayed as image overlays. When the status message appears, the flavor image will be obscured

so that the message can be seen. There are two flavor messages: "Selected" which is displayed when that flavor has been

selected for dispensing and "Sold Out" which is displayed when a flavor syrup is out.

The status messages will appear at the bottom-center section of the display. These messages will provide status information

for the barrel. For a list of all status messages, please refer to Section 7 of this manual.

After flavor selections are made, the status message area of the display will change to a "PUSH TO POUR" button.

Item Description

Flavor Buttons: Select flavor add-ins. Flavor messages will appear over flavors as image overlays.

Base Flavor Button: Flavor of the base syrup.

Barrel Status: Shows status of barrel.

Pour Button: Press and hold to dispense a drink.

4.3 Initial Set-Up

The flavor images will need to be set as part of the initial set-up of the merchandiser. Please refer to Section 5.1 for

additional information on menu options and Section 5.2 for additional information on updating the images for the flavors

(flavor add-ins and base syrup). Additionally, all flavor injection modules will need to be calibrated before the dispenser is

ready for store operation. Please refer to Section 5.7 for additional information on calibrating flavor modules.

Содержание 372







































Результаты поиска

Содержание 372

Отзывы:

Похожие инструкции для 372

Бренды по названию

Популярные бренды

FBD 372, Руководство по установке и эксплуатации

Результаты поиска

Содержание 372

Отзывы:

Похожие инструкции для 372

Бренды по названию

Популярные бренды