FAY-003
2-10
4.
USB 3.0 port.
This 9-pin Universal Serial Bus (USB) port connects to USB
3.0/2.0 devices.
NOTES:
•
USB 3.0 devices can be used for data storage only.
•
Due to the design of the Intel
®
300 series chipset, all USB devices
connected to the USB 2.0 and USB 3.0 ports are controlled by the xHCI
controller. Some legacy USB devices must update their firmware for better
compatibility.
•
We strongly recommend that you connect USB 3.0 devices to USB 3.0
ports for a faster and better performance from your USB 3.0 devices.
5.
USB 2.0 ports.
These three 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0/1.1 devices.
6.
COM port.
This 9-pin COM port is for pointing devices or other serial devices
2.7 Connectors
2.7.1
Rear panel connectors
LAN port
Speed
LED
Activity Link
LED
3
1
2
5
4
6
1.
DisplayPort connector.
This port connects a device with DisplayPort
connector.
2.
HDMI port.
This port is for a High-Definition Multimedia Interface (HDMI)
connector, and is HDCP compliant allowing playback of HD DVD, Blu-Ray,
and other protected content.
3.
LAN (RJ-45) ports.
These ports allow Gigabit connection to a Local Area
Network (LAN) through a network hub. Refer to the table below for the LAN
port LED indications.
LAN port LED indications
ACT/LINK LED
SPEED LED
Status
Description
Status Description
Off
No link
Off
10 Mbps connection
Orange
Linked
Orange
100 Mbps connection
Orange
(Blinking)
Data activity
Green
1 Gbps connection
Orange
(Blinking
then steady)
Ready to wake
up from S5
mode
_
_