Fayat DYNAPAC DRP15D, Инструкция по эксплуатации, Страница: 81 / 112

8.7.2 Changing the oil in the exciter housing
NOTICE!
Components may get damaged!
– Use only oil of the permitted specification
Ä
Chapter 8.3 ‘List of fuels and lubricants’
on page 72 .
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Drive the machine onto horizontal, level, firm ground.
2. Park the machine safely Ä Chapter 6.5 ‘Parking the machine
in secured condition’ on page 60 .
3. Clean the area around the bleeding screw (1) and filling/drain
plug (2).
4. Tilt the machine slightly towards the oil drain side and secure
it properly.
5. Unscrew the bleeding screw.
6. Unscrew the filling/drain plug and collect any oil running out.
7. Tilt the machine to the opposite side and secure it properly.
NOTICE!
Components may get damaged!
Do not use low-ash engine oils for the exciter shaft
housing.
Observe filling quantity
Ä
Chapter 8.3 ‘List of fuels
and lubricants’ on page 72 .
8. Fill in new oil.
1
2
B-695-0157
Fig. 77
B-695-0159
Fig. 78
Maintenance – Annually
DRP15D 81