Fayat DYNAPAC DRP15D, Инструкция по эксплуатации, Страница: 100 / 112

8.9.5 Cleaning the machine
1. Park the machine in secured condition Ä Chapter 6.5
‘Parking the machine in secured condition’ on page 60 .
2. Allow the engine to cool down for at least 30 minutes.
3.
NOTICE!
Electric components can be damaged by
water entering into the system!
– Do not guide the water jet directly into the
cooling air openings of the recoil starter,
into the dry air filter or onto electrical
equipment.
Clean the machine with a water jet.
4. Run the engine warm for a while to avoid corrosion.
8.9.6 Measures if there is a risk of frost
1. Park the machine safely Ä Chapter 6.5 ‘Parking the machine
in secured condition’ on page 60 .
2. Remove the cover.
3. Remove the rubber caps from the spray tubes.
4. Switch on the water spraying system.
5. Let all water flow out.
6. Switch the water spraying system off again.
7. Plug the rubber caps back on the spray tubes.
8. Close the cap.
Fig. 128
Water
B-692-0230
Fig. 129
B-692-0234
Fig. 130
Maintenance – As required
DRP15D 100