manualshive.com logo in svg

Fayat DYNAPAC DRP15D, Инструкция по эксплуатации, Страница: 18 / 112

Поделиться
Скачать
Fayat DYNAPAC DRP15D Скачать руководство пользователя страница 18

Safety goggles

They protect the eyes against airborne particles and

squirting fluids.

Face protection

This protects the face against airborne particles and

squirting fluids.

Hard hat

This protects the head against falling parts and injuries.

Hearing protection

This protects against extreme noise.

Fine dust mask

For protection against particulate pollutants.

Respiratory protection

This protects the airways against substances or parti-

cles.

3.1.4  Intended use

This machine is intended for commercial use only.

The machine must only be used for:

n

Compaction of all types of soils

n

Repair work on all types of soil

n

Paving of walkways

n

Work in trenches

n

Underfilling and compaction of hard shoulders

Intended use also includes compliance with the specified oper-

ating, maintenance and repair measures.

Concerning your safety – Basic prerequisites

 

DRP15D

 

18

Содержание DYNAPAC DRP15D

















































































































Отзывы:

Нет отзывов