Fayat DYNAPAC CT3000, Инструкция по эксплуатации

Страница: 33 / 108

Before starting the engine
2018-02-20 4812325559EN 29
Before starting the engine
Daily maintenance
Before starting your shift at work and operating
the machine, check that the daily maintenance
has been done. Refer to the maintenance section
in this manual for other information.
Main switch
Check if the machine main switch is at the "ON" position. The
main switch is located at the electrical device compartment (1),
on the right side of the machine.
After the daily use of the machine, the main switch
must be turned off. This avoids unexpected starting
and, mainly, protects the electrical devices.
Operator's controls
The operator's control and the machine operation have two
adjust options: 180º shifting and steering column inclination.
The 180º shifting is possible by pulling the lever (1) upwards.
Make sure that the controls are in their home positions before
operating the machine.
The steering column inclination is adjusted by releasing the
fixing lever (2). Fasten it again in the new position.
To adjust the operator's seat, please refer to the following
section.
Perform all adjustments in the operator's
controls with the machine stopped.
Before starting your shift at work and operating
the machine, check if the seat and the steering
column are locked.
1
Fig.
– Machine right view
1
2
Fig.
– Operator's controls