Fayat DYNAPAC CT3000, Инструкция по эксплуатации

Страница: 102 / 108

Maintenance
– Special instructions
98 4812325559EN 2018-02-20
POINT 2
– Fan drive pressure measurement point. It is located
on the rear chassis, at the right side, on the engine's cap (1
st
point from the rear to the front part).

Measurement pressure: 100 bar (1,450 psi) with the fan
working at 2,200 RPM.(to realize measurement press
the Engine radiators assembly cleaning button )
POINT 3
– Fan drive pressure measurement point. It is located
on the rear chassis, at the right side, on the engine's cap (2
nd
point from the rear to the front part).

Measurement pressure: 280 bar (4,061 psi) with the fan
working at 2,200 RPM (to perform the measurement
disconnect the fan pump solenoid)
POINTS 4 & 5
– Radiator pressure measurement point. It is
located on the rear chassis (input and output), at the right side,
on the engine's cap (3
rd
and 4
th
points from the rear to the front
part).

Measurement maximum pressure: 4 bar (60 psi) with
the fan working at 2,200 RP
POINT 6
– Blade pressure measurement point. It is located on
the front chassis, at the right side, next to the joint.

Measurement pressure: Maximum of 140 bar (2,030
psi)
2
3
4 5
Fig.
– Measurement points 2,3,4 and 5
6
Fig.
– Measurement point 6
Fig.
– Fan pump solenoid