Fayat DYNAPAC CT3000, Инструкция по эксплуатации

Страница: 29 / 108

Emergency Procedures
2018-02-20 4812325559EN 25
Machine electronic system failure
In the occurrence of a machine electronic system failure, the
multifunction display will inform the operator through a message
with a symbol (2) and the failure code (3), thus indicating the
problem. There is no emergency procedure for such cases,
therefore, turn off the engine immediately and check the cause.
When this failure happens, park the machine on
a safe place and contact DYNAPAC.
Press the “OK” button (1) on the screen to delete the message.
Releasing the emergency parking brake
If the engine or the hydraulic system becomes inoperative, the
emergency/parking brake can be released so the machine can
be towed safely to be repaired.
To release the emergency/parking brake, execute the following
procedure:
1. Release all three screws from the caliper cover of the
emergency/parking brake (1).
Be careful with spring pressure when
performing this procedure.
2.
Release the nuts from the stud of the return spring of the
brake pads.
Only loose the stud enough to release the
emergency/parking brake, because the return spring
of the brake pads, which is under pressure, can
release itself and cause serious personal injuries.
Fig.
– Parking brake caliper
Fig.
– Releasing the spring from the caliper
Fig.
– Multifunction display
1
1 2 3