manualshive.com logo in svg

Fayat Dynapac CC1100C VI, Инструкция по эксплуатации, Страница: 23 / 207

Поделиться
Скачать
Fayat Dynapac CC1100C VI Скачать руководство пользователя страница 23

Safety (Optional)

4812163101_A.pdf

2018-12-14

Safety (Optional)

Edge cutter/compactor

Fig.  Edge cutter/compactor
 1. Transport position
 2. Operating position
 3. Holder for cutter/compactor wheel.

3

1

2

The operator must make sure that nobody is in the
area of operation while the machine is in use.

The operator must make sure that nobody is in the
area of operation while the machine is in use.

The edge cutter consists of rotating components
and there is a risk of being crushed.

The edge cutter consists of rotating components
and there is a risk of being crushed.

The tool must be returned to the transport
position (raised position) (1) every time it has
been used.

The tool must be returned to the transport
position (raised position) (1) every time it has
been used.

If the edge cutter and its parts are dismantled,
make sure that it is set in a relieved position and
resting on the ground.

If the edge cutter and its parts are dismantled,
make sure that it is set in a relieved position and
resting on the ground.

Chip spreader

The machine must not be lifted or transported on
another vehicle with chips in the chip spreader.
The weight for the chip spreader is specified on
the unit rating plate. This weight is not included in
the machine weight specified on the lifting plate.

The machine must not be lifted or transported on
another vehicle with chips in the chip spreader.
The weight for the chip spreader is specified on
the unit rating plate. This weight is not included in
the machine weight specified on the lifting plate.

Fig. Chip spreader

The operator must make sure that nobody is in
the area of operation while the machine is in
use.

The operator must make sure that nobody is in
the area of operation while the machine is in
use.

The machine must NOT be lifted from a
single-point lift if the chip spreader is fitted.

The machine must NOT be lifted from a
single-point lift if the chip spreader is fitted.

Risk of crushing and pinch injuries. The chip
spreader has rotating parts.

Risk of crushing and pinch injuries. The chip
spreader has rotating parts.

The chip spreader must be reset in transport
mode after it has been used.

The chip spreader must be reset in transport
mode after it has been used.

9

Содержание Dynapac CC1100C VI
















































































































































































































Отзывы:

Нет отзывов