manualshive.com logo in svg

Fayat Dynapac CC1100C VI, Инструкция по эксплуатации, Страница: 143 / 207

Поделиться
Скачать
Fayat Dynapac CC1100C VI Скачать руководство пользователя страница 143

Maintenance - 500h

4812163101_A.pdf

2018-12-14

Maintenance - 500h

Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.

Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.

Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.

Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.

Battery
- Check condition

Fig.  Battery

The battery is sealed and maintenance-free.

Make sure there is no open flame in the vicinity
when checking the electrolyte level. Explosive gas
is formed when the alternator charges the battery.

Make sure there is no open flame in the vicinity
when checking the electrolyte level. Explosive gas
is formed when the alternator charges the battery.

When disconnecting the battery, always
disconnect the negative cable first. When
connecting the battery, always connect the
positive cable first.

When disconnecting the battery, always
disconnect the negative cable first. When
connecting the battery, always connect the
positive cable first.

The cable shoes should be clean and well-tightened.
Corroded cable shoes should be cleaned and greased
with acid-free Vaseline.

Wipe the top of the battery.

129

Содержание Dynapac CC1100C VI
















































































































































































































Отзывы:

Нет отзывов