manualshive.com logo in svg

Fayat BOMAG BW 213 D-4, Руководство по эксплуатации

Поделиться
Скачать
Fayat BOMAG BW 213 D-4 Скачать руководство пользователя страница 142

WARNING!
Danger of scalding!

Change the coolant only when the engine is cold.

NOTICE!

Do not start the engine after draining off the coolant.

In case of lubrication oil entering into the cooling

system or a suspicious turbidity caused by corrosion

residues or other suspended matter, the coolant must

be drained off and the complete cooling system needs

to be cleaned. Lubrication oil can damage the sealing

materials used in the engine.

When changing the coolant without any signs of con-

tamination, cleaning of the cooling system is not nec-

essary.

For quality and quantity of coolant refer to the "table of

fuels and lubricants".

Do not mix different coolants and additives, see sec-

tion "Fuelds and Lubricants - Coolant".

ENVIRONMENT!

Catch coolant and dispose of environmentally.

Unscrew the lid from the compensation tank.

Fig.  175

Maintenance

 

BW 213 D-4  

 

142

Содержание BOMAG BW 213 D-4



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды