8.11.4
Checking the oil level in the exciter housing
NOTICE!
Components may get damaged!
–
Use only oil of the permitted specification
Chapter 8.4 „List of fuels and lubri-
.
–
Do not use low-ash engine oils for the exciter
shaft housing.
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
1.
Park the machine on level ground.
2.
Park the machine safely
Chapter 6.4 „Parking the machine
in secured condition“ on page 55
.
3.
Allow the machine to cool down.
4.
Clean the area around the bleeding screw (1) and filling/drain
plug (2).
5.
Unscrew the bleeding screw.
6.
Unscrew the filling/drain plug and check the oil level; top up if
necessary.
ð
Nominal value:
Bottom edge of filling/drain bore.
7.
Clean the bleed screw and filling/drain plug and screw them
in with a low-strength sealing agent (e.g. spare parts number:
009 700 16).
8.11.5
Measures prior to extended shut-down period
8.11.5.1
Measures before shutting down
If the machine is shut down for a longer period of time, e.g. winter
season, the following work must be carried out:
1.
Clean the machine thoroughly.
2.
Clean the water separator.
3.
Fill the fuel tank with diesel fuel to prevent the formation of
condensation water in the tank.
4.
Change engine oil and oil filter.
5.
Change the fuel filter.
6.
After shutting down store the machine under cover in a dry
and well ventilated room.
7.
Protect the cooled down engine against dust and moisture.
2
1
B-692-0015
Fig. 112
Maintenance – As required
BPR 50/55 D
94
Go
to
Discount-Equipment.com
to
your
parts
