Fayat Group DYNAPAC DRP25D Скачать руководство пользователя страница 112

Страница: 112 / 118

9.6 Shutting down the engine with the shut-off device

WARNING!
Danger of burning on hot components!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

–

Avoid touching hot components.

CAUTION!
Danger of injury caused by uncontrolled

machine movement!

–

Always hold on to a running machine.

–

Always keep an eye on a running machine.

The engine can also be switched off via the shut-off device in the

event of a fault in the speed adjustment.

Keep feet and hands clear of the vibrating base plate.

Protective equipment:

Working clothes

Safety shoes

Protective gloves

Drive the machine onto horizontal, level, firm ground.

Press and hold the shut-off device until the engine switches

off.

Let go of the shut-off device.

The shut-off device must return to its initial position.

If necessary, pull the shut-off device gently to return it to its

initial position.

Inform our Customer Service Department.

B-695-0148

Fig. 135

Troubleshooting – Shutting down the engine with the shut-off device

DRP25D

112

Содержание DYNAPAC DRP25D























































































































Результаты поиска

Содержание DYNAPAC DRP25D

Отзывы:

Fayat Group DYNAPAC DRP25D, Оригинальная инструкция по эксплуатации, Страница: 112 / 118

Результаты поиска

Содержание DYNAPAC DRP25D

Отзывы: