Fayat Group DYNAPAC DRP25D, Оригинальная инструкция по эксплуатации, Страница: 102 / 118

8.11.4 Checking the oil level in the exciter housing
NOTICE!
Components may get damaged!
– Use only oil of the permitted specification
Ä
Chapter 8.4 ‘List of fuels and lubricants’
on page 73 .
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Drive the machine onto horizontal, level, firm ground.
2. Park the machine safely Ä Chapter 6.4 ‘Parking the machine
in secured condition’ on page 59 .
3. Allow the machine to cool down.
4. Clean the area around the bleeding screw (1) and filling/drain
plug (2).
5. Unscrew the bleeding screw.
NOTICE!
Components may get damaged!
Do not use low-ash engine oils for the exciter shaft
housing.
6. Unscrew the filling/drain plug and check the oil level; top up if
necessary.
ð
Nominal value: Bottom edge of filling/drain bore.
7. Clean the bleed screw and filling/drain plug and screw them
in with a low-strength sealing agent (e.g. spare parts number:
DL 009 700 16).
8.11.5 Measures prior to extended shut-down period
8.11.5.1 Measures before shutting down
If the machine is shut down for a longer period of time, e.g. winter
season, the following work must be carried out:
1. Clean the machine thoroughly.
2. After shutting down store the machine under cover in a dry
and well ventilated room.
3. Repair damaged paint; preserve bare areas thoroughly with
anti-corrosive agent.
4. Clean the water separator.
5. Fill the fuel tank with diesel fuel to prevent the formation of
condensation water in the tank.
6. Change the engine oil and clean the oil filter.
1
2
B-695-0166
Fig. 127
Maintenance – As required
DRP25D 102