Fayat Group Dynapac DFP11 Скачать руководство пользователя страница 92

Страница: 92 / 114

Secure the coil against winding up. For this purpose tie the

coil (2) to the housing (5) with a cable strap (1).

Untie the knots of the starter rope at both ends and remove

the old starter rope.

Thread in the new starter rope (3) and fix it with knots on

both ends.

CAUTION!
Danger of injury caused by the starter

handle hitting against your body!

–

Do not let the starter handle hit back.

Remove the fixing of the coil and run the starter handle

slowly back to initial position.

10.

Pull the starter handle to check the function and light move-

ment of the recoil starter.

11.

Assemble the recoil starter.

8.8.6 Changing the oil in the exciter housing

NOTICE!
Components may get damaged!

–

Use only oil of the permitted specification

Chapter 8.3 „List of fuels and lubri-

cants“ on page 77

Protective equipment:

Working clothes

Protective gloves

Park the machine on level ground.

Park the machine in secured condition

Chapter 6.5

„Parking the machine in secured condition“ on page 64

Fig. 85

Fig. 86

Fig. 87

Maintenance – Annually

DFP11

Содержание Dynapac DFP11



















































































































Результаты поиска

Содержание Dynapac DFP11

Отзывы:

Fayat Group Dynapac DFP11, Руководство по эксплуатации, Страница: 92 / 114

Результаты поиска

Содержание Dynapac DFP11

Отзывы: