Fayat Group Dynapac DFP11, Руководство по эксплуатации, Страница: 100 / 114

Depending on weather conditions these conservation measures
will protect the machine for approx. 6 to 12 months.
1. Park the machine in secured condition
Ä
Chapter 6.5
„Parking the machine in secured condition“ on page 64 .
2. Allow the engine to cool down for at least 30 minutes.
3. Clean the machine thoroughly.
4. Change the engine oil
Ä
Chapter 8.7.1 „Changing the engine
oil“ on page 83 .
5. Use fuel stabilizer or drain off fuel completely.
1. Mix fresh fuel with fuel stabilizer (follow the instructions of the
manufacturer).
2. Empty the fuel tank and fill it with the prepared fuel mix.
3. Start the engine and run the machine for approx. 10 minutes
in the open.
4. Park the machine in secured condition.
1. Close the fuel valve.
2. Disassemble the drain plug (3) and the seal (4) from the car-
burettor and catch running out fuel.
3. Disassemble filter bowl (2) and O-ring (1).
4. Open the fuel valve and catch running out fuel.
5. Close the fuel valve.
6. Install the drain plug with the seal on the carburettor.
7. Assemble the filter bowl with the O-ring.
8. Dispose of fuel environmentally.
Using fuel stabilizer
Emptying the fuel tank.
Fig. 100
Fig. 101
Maintenance – As required
DFP11 100