Fayat Group DYNAPAC CC1300C, Инструкция по эксплуатации

Страница: 54 / 134

Operation
4812162101_D.pdf 2021-12-14
Starting
Starting the engine
1
3
6
20
29
31
37
Fig. Control panel
1. Starter switch
3. Emergency stop
6. Forward/reverse lever
20. Vibration switch man/auto
29. Glow lamp
31. Parking brake
37. Speed selector
Make sure that the emergency stop (3) is pulled out
and the parking brake (31) is activated.
Set the forward/reverse lever (6) in neutral. The
engine can only be started when the lever is in neutral.
Set the vibration switch (20) for manual/automatic
vibration in (position O).
With high outer temperature, set the speed selector
(37) to idling: Low.
Preheating: Turn the ignition key to position II.
When the glow lamp (29) goes out: Turn the ignition
key to the right to position III.
As soon as the engine has started, release the ignition
key.
Do not run the starter motor for too long. If
the engine does not start, wait a minute or so
before trying again. Do not run the starter motor for too long. If
the engine does not start, wait a minute or so
before trying again.
Warm up the engine at idling speed for a few minutes,
although longer if ambient temperature is below +10°C
(50°F).
44