Fayat Group DYNAPAC CC1300C, Инструкция по эксплуатации

Страница: 110 / 134

Maintenance measures - 500 h
4812162101_D.pdf 2021-12-14
Replacing the diesel engine’s oil separator
filter
(applies to 1500h)
Fig. Engine compartment
1. Oil separator filter
1
N.B. The engine must be switched off when
changing the filter.
Loosen the filter’s bottom cover (2) and remove the
filter insert and O-ring (3).
4
3
2
Fig. Oil separator filter
2. Cover
3. Filter insert and O-ring
4. Filter housing
Remove the filter insert (3) and hand in to a
waste disposal station. This is a disposable filter
and cannot be cleaned. Remove the filter insert (3) and hand in to a
waste disposal station. This is a disposable filter
and cannot be cleaned.
Wipe out any deposits in the bottom cover (2) and filter
housing (4).
Fit the new filter insert with O-ring (3) and refit the
bottom cover (2).
Start the diesel engine and allow it to run at full revs
for 30 seconds. Check that the filter cap (2) is tight.
100