Fayat Group Bomag BVP 10/36 Скачать руководство пользователя страница 51

Страница: 51 / 60

As required

BOMAG

BVP 10/36, BVP 18/45

As r equi red

5.21 Change the air filter

Caution

Do not run the engine without an air filter,
since this could cause premature wear of the
engine.

The air filter must be changed after several
times cleaning, but at the latest after 1 year.

Contaminants or dirt must not enter into the in-
take channel.

Fig. 59

Unscrew wing nut (1) (Fig. 59) and remove the
housing cover (2).

Clean the housing cover from inside.

Unscrew wing nut (3) and take off paper ele-
ment (4) with the foam rubber insert (5).

Check the rubber seal (6), replace if neces-
sary.

Caution

The rubber seal (6) frequently sticks to the pa-
per element.

Soak the new foam rubber insert (5) in clean
engine oil. Then squeeze out excess oil.

Pull the foam rubber element (5) over the new
paper element (4).

Insert the air filter correctly and tighten it with
the wing nut (3).

Caution

If the air filter is not correctly inserted, dust
and foreign particles can enter into the air in-
take channel.

Reassemble the housing cover (2) with the
wing nut (1).

*Always follow manufacturer instructions*

*AAA Rent-All 225-291-1356*

Содержание Bomag BVP 10/36





























































Результаты поиска

Содержание Bomag BVP 10/36

Отзывы:

Бренды по названию

Популярные бренды

Fayat Group Bomag BVP 10/36, Руководство по эксплуатации

Результаты поиска

Содержание Bomag BVP 10/36

Отзывы:

Бренды по названию

Популярные бренды