Fayat Group Bomag BVP 10/36, Руководство по эксплуатации

Страница: 47 / 60

Maintenance every year
BOMAG 47 BVP 10/36, BVP 18/45
Maintenance every year
5.17 Checking, adjusting the
valve clearance
i Note
Check and adjust only when the engine is cold.
Fig. 47
l
Loosen the screws (1) and take off the valve
cover (2) (Fig. 47) with gasket (3).
Fig. 48
l
Set the piston to top dead centre position of
the compression stroke.
l
For this purpose align triangle mark (1) (Fig.
48) on the starter disc to the top bore (2).
Check the valve clearance
Fig. 49
l
Check the valve clearance with a feeler gauge
on both valves (1) (Fig. 49).
i
Note
Exhaust valve clearance: 0.20 mm
Intake valve clearance: 0.15 mm
Adjust the valve clearance
Fig. 50
l
Hold hexagon nut (4) (Fig. 50) on the rocker le-
ver and loosen counter nut (3).
l
Adjust hexagon nut (4) on the rocker arm so
that the feeler gauge fits between rocker arm
and valve shaft (1) with noticeable resistance
after retightening counter nut (3).
l
Install the valve cover with a new gasket and
tighten the screws evenly.
*Always follow manufacturer instructions*
*AAA Rent-All 225-291-1356*