EZ Presentator
EZ Presentator
TROUBLESHOOTING
You need to activate
EZ presenter
by running the exe file before you can use
EZ presenter.
If
Software is running the software icon will appear on the task bar. Now you should be able
to use the software features.
The receiver may not be plugged to the USB port correctly.
Either the receiver is not plugged into the USB port of your computer, or the receiver is inserted
into the USB port Up side Down. If the receiver is plugged correctly, the blue indicator
of the receiver should blink once.
The presenter batteries are dead.
Please replace the batteries.
The presenter is not responding but laser pointer is still working.
The battery voltage might be too low although the laser pointer is still working. Please
insert a fresh pair of batteries.
You can't use the mark pen when you press and hold the RIGHT button for more
than 2 seconds
Computer does not respond to clicks on the presenter
Note:
If you plan to use a computer that does not belong to you, make sure you have the EZ presenter exe file
on a USB flash drive. Plug it into the computer you want to use for the presentation, and double click
this exe file before the presentation to activate EZ presenter
Note:
Please do not use rechargeable batteries on this product because they have lower voltage and can
cause malfunctions.
