Favero Electronics 154-01, Инструкция по установке и эксплуатации

Страница: 9 / 44

9
/ 44
FAVERO ELECTRONICS
- 151029 - 00154-M01-ML - Speaker Timer User Manual Rev01
ENGLISH
5.2. Specific parameters
To access programming functions:
• press [ TIMER ] several times until the desired “ speaking time ” is displayed (“ t1 ”, “ t2 ”, …,
“ t9 ”), and then
• press [
PROG
] within 3 seconds.
Each parameter being modified is identified by a light switched on.
Specific parameter Value
Speaking time Light Description min default max
t1 green Total time. 0:00 10:00 99:50
yellow Time before expiry warning. 0:00 1:00 99:50
red Operating mode at expiry. 0 0 2
t2 green Total time. 0:00 20:00 99:50
yellow Time before expiry warning. 0:00 2:00 99:50
red Operating mode at expiry. 0 0 2
...
t9 green Total time. 0:00 90:00 99:50
yellow Time before expiry warning. 0:00 9:00 99:50
red Operating mode at expiry. 0 0 2
Press [
PROG
] or [
ON-OFF
] again to quit the programming mode.
5.3. Programming example
You wish to program the third “ speaking time ” in the following way:
• backward count;
• sound with maximum volume;
• maximum duration of the speech 15 minutes;
• warning for time available before expiry at 5 minutes and 30 seconds;
• counting continuing after expiry.
Proceed as follows:
general parameters
1. Press [
PROG
] to access the general parameters setup.
ST
displays the parameter “
H1
”
(counting mode) and its current value: use [ + ] and [ - ] to set the parameter to “ dn ”.
2. Use the arrow key [ > ] to scroll the parameters up to “ H3 ” (volume) and set it to “ 3 ”.
3. Exit setup with [ PROG ].
specific parameters
4. Press [ TIMER ] various times until “ t3 ” is displayed; then press [ PROG ] to access the
“ speaking time ” specific parameters.
5. ST displays the total time (green light): take the value to “ 15:00 ”, then pass to the
following parameter.
6. Set the warning time (yellow light) to “ 5:30 ” and then set the mode (red light) to “ 2 ”.
7. Exit the setup with [ PROG ].