FAURE FFQ27908, Руководство пользователя

Страница: 16 / 24

Cleaning the oven door
The oven door has four glass panels. You can remove
the oven door and the internal glass panels to clean
them.
The oven door can close if you try to
remove the glass panels before you
remove the oven door.
Caution! Do not use the appliance
without the glass panels.
1
Open the door fully and
hold the two door hinges.
1
2
Lift and turn the levers on
the two hinges.
2
3
Close the oven door
halfway to the first
opening position. Then
pull forward and remove
the door from its seat.
3
4
Put the door on a soft
cloth on a stable surface.
4
5
Release the locking
system to remove the
glass panels.
5
90°
6
Turn the two fasteners by
90° and remove them
from their seats.
6
2
1
7
First lift carefully and
then remove the glass
panels one by one. Start
from the top panel.
7
Clean the glass panels with water and soap. Dry the
glass panels carefully.
When the cleaning is completed, install the glass panels
and the oven door. Do the above steps in the opposite
sequence.
Make sure that you put the glass panels (A, B and C)
back in the correct sequence. The middle panel (B) has
a decorative frame. The screen-printing zone must face
the inner side of the door. Make sure that after the
installation the surface of the glass panel frame (B) on
the screen-printing zones is not rough when you touch
it.
A B C
Make sure that you install the middle panel of glass in
the seats correctly.
16