Faulhaber 2232 BX4 IMC, Техническое руководство, Страница: 8 / 41

1st edition, 9.04.2024 7000.05073, 1st edition, 9.04.2024 7000.05073
Safety
8
2 Safety
2.1 Intended use
The Motion Control Systems described here consist of a combination of a base motor and
an integrated Motion Controller.
The Motion Control Systems are intended for use as slaves, and are particularly suitable for
positioning tasks in the following application fields:

Robotics

Toolbuilding

Automation technology

Industrial equipment and special machine building

Medical technology

Laboratory technology
When using the Motion Control Systems the following aspects should be observed:

Motion Control Systems contain electronic components and should be handled in
accordance with the ESD regulations.

Do not use the Motion Control Systems in environments where it will come into contact
with chemicals, nor in explosion hazard areas.

The Motion Control Systems should be operated only within the limits specified in the
corresponding data sheet.

Please ask the manufacturer for information about use under individual special envi -
ronmental conditions.
2.2 Safety instructions
In addition to the safety risks described in this technical manual, machine-specific dangers
could arise that cannot be foreseen by the manufacturer of the Motion Control Systems
(e.g., risk of injury from driven components). The manufacturer of the machine in which the
Motion Control System is installed must perform a risk analysis in accordance with the regu
-
lations applicable to the machine and inform the end user of the residual risks.