Faulhaber 2232 BX4 IMC, Техническое руководство, Страница: 20 / 41

1st edition, 9.04.2024 7000.05073, 1st edition, 9.04.2024 7000.05073
Installation
20
Tab. 6: Electrical data 22xx BX4 IMC
Wire Designation Meaning Value
1 U
P
Power supply of the electronics 6…30 V DC
AnIn2
a)
a) Option 7431 (shared power supply)
Analog input Voltage signal 0…10 V
Ground reference GND
2 U
mot
Power supply of the motor 6…30 V DC
U
B
a)
Power supply of the MCS 6…30 V DC
3 GND Common ground Ground reference
4 DigIn1 / DigOut2 /
AnIn1 Digital input 0…30 V
27 k
Ω
<1 MHz
Digital output Low = GND
High = high resistance
27 k
Ω
Max. 0.7 A
Analog input Voltage signal 0…10 V
b)
Reference potential: AGND
b) For a voltage /- 10 V, the potential at AGND must be raised to such an extent that there is no negative
potential at AnIn1 in relation to GND. Example: 0 V < AnIn1 < 20 (see Fig. 10).
Option 7630 must be selected for voltage signals of up to –10 V relative to GND. The DigOut2 function is then
not applicable.
5 DigIn2 / AGND Digital input 0…30 V
27 k
Ω
<1 MHz
Reference potential to AnIn1
6 DigIn3 / DigOut1 Digital input 0…30 V
27 k
Ω
<1 MHz
Digital output Low = GND
High = high resistance
27 k
Ω
Max. 0.7 A
7 RS232 RXD / CAN_L
c)
c) Wiring depends on the selected product IMC RS/CO
Communication RS232 RxD / CAN-L
8 RS232 TXD / CAN_H
b)
Communication RS232 TxD / CAN-H