FATEK Automation Corp.
www.fatek.com
5
iii. In QCU, choose the correct COM PORT number and press “Open Port”
button. Then the QCU is able to talk with the connected FBs-CMZBR.
b.
Enter Configuration mode
Press “Enter Configuration (1B 1B)” button and the target device will enter
into Configuration mode. Actually this is done by sending 2 consecutive 0x1B
codes into the connected device.
c.
Set Baud Rate
That is the baud rate of cable communication. By choosing the desired Baud
rate, the QCU will set the baud rate inside the connected device.
d.
Parity Enable
