Fastwel CPC308 Скачать руководство пользователя страница 80

Страница: 80 / 81

СРС308 Processor Module

Transportation, Unpacking and Storage

C P C 3 0 8 U s e r M a n u a l

Transportation, Unpacking and Storage

8.1

Transportation

The module must be transported in individual factory packages consisting of an individual

antistatic bag and a cardboard box, in closed vehicles (in heated and airtight compartments of
motor, railroad or airborne vehicles) under storage conditions 5 as per GOST 15150-69 or under
storage conditions 3 during transportation by sea.

It is allowed to transport modules packed in individual antistatic bags in factory multipacks.

Packed modules must be transported pursuant to the cargo transportation rules applicable to

this mode of transport.

During loading and unloading work and transportation, packed modules must not be exposed

to jerks, falls, shocks and atmospheric precipitation. The stowage of packed modules in a vehicle
must exclude their shifting.

8.2

Unpacking

The modules that were transported at subzero ambient temperature must be stored for 6

hours under storage conditions 1 as per GOST 15150-69 before they can be unpacked.

Placing packed modules in front of a heat source before their unpacking is forbidden.

In the process of the modules unpacking one must observe all the precautions ensuring their

safety and marketable appearance of the factory packages.

Upon unpacking, the modules must be checked for external mechanical damage after

transportation.

8.3

Storage

Modules storage conditions: 1 as per GOST 15150-69 (IEC721).

Содержание CPC308


















































































Результаты поиска

Содержание CPC308

Отзывы:

Fastwel CPC308, Руководство пользователя, Страница: 80 / 81

Результаты поиска

Содержание CPC308

Отзывы: