Fastwel CPC1001 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 35

Fastwel CPC1001 Скачать руководство пользователя страница 10

CPC1001

C P C 1 0 0 1 U s e r M a n u a l

8

© 2 0 2 1 F a s t w e l V e r . 0 0 1

Transportation, Unpacking and Storage

Transportation

The modules should be transported in the separate

manufacturer’s packaging (container),

consisting of an individual antistatic packaging and a cardboard box.

The packaging should ensure the integrity and performance of the product after transportation.

Attention!

During transportation, the transport packaging should provide proper protection of the product

against direct exposure of atmospheric precipitation.

Hauling equipment and climatic conditions

The modules should be transported in closed transport (by road, rail or air in heated and sealed

compartments) under storage conditions 5 in accordance with the GOST 15150-69 standard or

under storage conditions 3 for sea transportation.

Placement and fastening of shipping containers

The shipping containers should be placed and fastened in such a way that will ensure their stable

position, exclude their displacement and damages by impacts during transportation.

Attention!

During handling operations and transportation, the packed modules should not be subjected to

sudden shocks, drops or impacts, which may affect their safety and performance.

Storage

Storage conditions of the modules 1 comply with the GOST standard 15150-69.

Unpacking

Safety precautions

Before unpacking, after transportation at negative ambient temperatures, the modules must be

kept for 6 hours under storage conditions 1, in accordance with the GOST standard 15150-69.

Do not place the packaged modules near any heat sources before unpacking.

When unpacking the modules, it is necessary to observe all precautions to ensure their safety, as

well as marketable condition of manufacturer’s consumer packaging.

«
...
8
9
10
11
12
...
»

Содержание CPC1001




































Отзывы:

Нет отзывов